JohnCa72

I did reverse the banjo and have no necessity of the Carbonrevo spacers.

You need the Elvedes Hydro Kit #2 to do this and also a 5mm x 5mm bolt as the new bleeding bolt.

I will recommend you this tutorial also: 

https://www.reddit.com/r/dualtron/comments/f62wd0/dualtron_thunder_magura_mt5e_upgrade/

That’s the screws I used on my Ultra, without any issue


Envoyé de mon iPhone en utilisant Tapatalk

On 6/19/2020 at 2:34 AM, sonkenn said:

Hi,

you need the Formula bleeding screw, this is a Formula set.

That's a 5 mm bleeding screw

Hi Ken, I followed your recommendation but these screws are to short (banjo and couple of washers) and doesn't go inside the caliper enough to adjust.

So I ended up using the banjo bolt that came with de Elvedes Hydro Kit.

Also had leak issues with the copper washers. They don't seal really good and needed to get some others that came with a rubber o ring inside.

Thanks!! 

On 6/19/2020 at 2:34 AM, sonkenn said:

Hi,

you need the Formula bleeding screw, this is a Formula set.

That's a 5 mm bleeding screw

Thanks!!