enaon

thank you for the detailed description, I will look closer. 

15 minutes ago, Techos78 said:

Yesssss, done! .

success at last
 

15 minutes ago, Techos78 said:

the button always stays blue

I have pushed another update, this time it will update the inmotion dash settings file, Please verify that the button switch is now showing the correct state, and that the state is enforced on connection. 

It should always turn the light off on "long press disconnect", and set the light to the state of the switch on "long press connect". 

On 9/6/2021 at 10:09 PM, Techos78 said:

-- light box ON--OFF has no effect
-- when horn box is activated, the message ". . . speed> 2KPH" is displayed but a short bt

Hello, I believe I fixed the problem, can you please test that lights control and horn is ok?

To make it easier, I have moved the inmotion version one up, so you can connect to the testing loader, and in the tab "my apps" it will say that there is a new update, this will only reinstall the inmotion module file. 

 

thank you too, now we can solve the bugs you will find

2 hours ago, Cormo said:

press the airplane icon (this is the Bluetooth icon when all services are off). Inside there will be a >. icon (this is the ide/loader icon), make it blue, and then press the "restart"(this will also save your settings) button on your second picture, From there on the loader will work. 

yes, restart is that fast, we are on a microprocessor. 

ps. the icon in the midlle(the arrow and the dot) is the turn-to-wake-screen accelerator function. It consumes some battery, so you can have it off to maximize standby battery life. It will automatically turn on when you connect to the EUC, and will revert to the state of this switch when the connection to the EUC is closed, so you do not have to enable/disable it manually.

13 hours ago, Techos78 said:

 

one more info, this number on the clock face, is the total distance af all garage slots on the watch added (each slot has it's own logs), so the name could be Techos78 instead of eucWatch.  

you can change it if you like from the loader, there is a "change settings" button there. You can also add your total distance up to now if you know it, and it will add it too. 

Remember to press the disconnect button when finished on the site, it will automatically restart the watch for you. The testing loader is improved, it takes the watch to devmode automatically to make sure no comms are lost due to memory, and restarts the watch when disconnect is pressed. 

9 hours ago, Techos78 said:

can you tell me the difference between these 4 values
- screen 1: 65 Km
- screen 2: 64.58 km
- screen 4: TRP 63 Km and TOT 63.4 Km

It is somewhat the same number, just a round up to closer value because some fields have room for decimals and some do not. I will fine tune it a bit more. 

Quote

I think 44% is the remaining v11 battery.

correct, it is gray because your battery is under 50%, blue over 50, red if under the number you set on the "watch alerts" for battery low. 

you can also press on "day" (which is not really day, it is the last 24 hours, this is why it is a bit more, you had a little usage yesterday) and it will display week and year.

Quote

You can move a yellow cursor to detail, for example between 2 and 3 pm I did 20.67 km.

you can go to setting from the clock face, press the "i" button on the bottom center, and then press the 24h switch to make it 12h. This will also change the logs format, so it will read "2 and 3 pm"

7 hours ago, Cormo said:

I cannot figure how to do the upgrade to the P8-testing version. The watch is not detected any more by the BT of my phone.

I tried to restart the watch but nothing better.

 

 

maybe you turned off the loader support on the settings?  It is the >. icon on bluetooth menu, is should be blue for the loader to work. A restart is also needed after you make it blue. 

34 minutes ago, Cormo said:

Hello @enaon, unfortunately it doesn't.

Hoping it can help, here is what I observe :

Pressing the "LIGHT ON" button on the watch turns it to "FLASHING" and no further action is possible, it remains stucked on FLASHING. After some unrecorded manipulations I managed to have the button operate again, and to turn it to "LIGHT OFF", but as soon as the bluetooth connexion is lost / recovered, it turns back to "ON" again.

Also, after turning accidentaly the display in mph, I struggled to put it back in kph : it seems that the touchscreen is sometimes totally inoperative concerning the action on buttons, while the sweep control to toggle between menus remains active. Maybe it is a hardware problem of the watch and has no concern with the application.

thanks for the info. 

so this is a gotway tesla V2, 

with a watch of type?

and testing loader?

It looks like you are still on standard loader, testing one has the mph/kph on a menu, and some fixes for gotways random numbers. It is the one that is actually developed, the standard one is just an old snapshot that will be replaced soon with a newer snapshot, but till then you can test if you like.

the dash options menu, mph/kph etc, are in the info button on settings, when settings are called from a dash app

11 hours ago, Techos78 said:

15 hours ago, enaon said:

I have added horn and lights control for the v11, but it is not verified as working yet. You could be the brave one.  😁

In ancient Egypt, bearers of bad news were often executed ... please be understanding   

🙂

thank you for testing, I will have a closer look. 

2 hours ago, Techos78 said:

It's good news to be able to display this, because the KS-S20 is coming ... (126V!).

Greek cartoon : https://www.youtube.com/watch?v=ZlT8S4dflig     (Need to stop when working too hard...)

I have added horn and lights control for the v11, but it is not verified as working yet. You could be the brave one.  😁

22 minutes ago, Cormo said:

I have also experienced unexpected alarms, even while riding slowly on a flat road.

When it happens, the watch displays strange values such as voltage = 100V, so my guess is that sometimes the data stream between the wheel and the watch has been more or less corrupted in a way the watch receives a kind of  random data that can sometimes trigger the alarms.

Another clue in this way is that after it occurs the front light of the wheel changes status ie was OFF and I find it either ON or Flashing. I think this could indicate that the bluetooth connection has been temporarily lost / recovered.

Is the odd values issue on a gotway? Gotway does that if the bt signal is not good, Inmotion does it sometimes too, but is rare on inmotion. It is not happening at all on ks, ninebot or the sherman.

my post above was about the kingsong safety alarm (tiltback warning), only ks has this one for now, and it cannot be disabled on the watch, it is always on. But as   Skilr18 and others have noticed it was not fine tuned for riding at the limits on a full battery, which is considered safe on a ks. So this change now makes the tilt-back warning alarm more useful I think. 

On 9/5/2021 at 1:26 AM, Skilr18 said:

Another thing, my watch vibrate continously when i walk above 30km/h, The alerts are disabled.

any solution to avoid this?

I have given this some more thought, and a fellow rider offered a better solution.

up to now it was like so:

euc.dash.alrm=( euc.dash.spdL-5 < euc.dash.spd)?1:0;
 

so the alarm was "on" if the current speed was 5 khm close to the automatic Limit-speed. 

it is now changed to this:

euc.dash.alrm=(euc.dash.spdL < euc.dash.spdT && euc.dash.spdL-5 < euc.dash.spd)?1:0;
 

so an extra check is made, now it checks that the limit speed if actually lower than the tilt-back speed, and if so, it checks that against the current speed. This ensures that when on full battery, you will not get alarms if cruising at full speed, the tilt-back is gradual and is ok. But when on lower battery or uphill, in a situation where the limit speed is auto set by the wheel lower that the tilt-back speed you have set at the wheel menu, then it will buzz an alarm to inform you that a tilt-back is next. 

Please upload again if you want to test. 

10 hours ago, Cormo said:

I don't understand why this feature ? Honestly, I thought it was a bug...

In my opinion it's somewhat annoying to have to switch off the light each time. On the Tesla it seems that it also modifies the led sheme. Not that it really matters, but it looks like some kind of unexpected "border effect" (free translation for "effet de bord" in french)   

If you don't want the light to be on when connecting, just turn it off from the switch on the watch, it will remember it. Or set it to auto, this is what ks does.  

Wheels do not sync lights state, and I want the state to apply the horn and the "city" mode on ks, so the state of the switch is enforced on connection. 

use this loader if you like to report bugs, the standard one is very old, I cannot really remember if something is already fixed or not. 

https://enaon.github.io/eucWatch/p8-testing

there is also a telegram group for bugs reporting if one cares to help, look for "euc.gr eucWatch testing" 

5 hours ago, Skilr18 said:

Another thing, my watch vibrate continously when i walk above 30km/h, The alerts are disabled.

any solution to avoid this?

Is it a kingsong wheel?

If so, and if you are sure the speed alarm is disabled (gray color) then it is the "speed limit" that is buzzing, you cannot disable it. Kingsong has a dynamic limit speed, the number is showing left of the current speed, in a block called "limit". If you are within 5km/h from limit speed, regardless if current speed went up or limit speed went down, you will receive an alarm. 

50 minutes ago, Cormo said:

Installing EUC Watch was an easy job

nice it worked fine, are you on the standard or the testing loader?

On 9/2/2021 at 3:53 PM, Skilr18 said:

Enaon,

Is it possible to have an option on the watch to disable side leds on KINGSONG KS16S (and these LED stay disabled each time the bluetooth connection is done) ?

I will add it yes, in the meantime try a full update from testing, I think that I do not turn them on now. 

35 minutes ago, Techos78 said:

Yes, the side of the heart, of course  .

I will upgrade asap ... maybe the horn and the total mileage works on v11? But don't worry if this is not (yet) the case ... Thank you for this great work.
And this will reset the watch, it is 3 minutes late.

I have not yet completed the v11 client, so no horn and no total mileage yet  from the wheel, but the distance log should work, so it will be better than it is now.

you can use the ( set time ) button from the loader at any time, it will sync the time

On 8/15/2021 at 12:09 PM, Skilr18 said:

Cuckoo,

 

hello again, I have pushed some fixes, and a battery drain on the p22, please install all again from the testing loader. 

Also, anyone that want to try the new version, please go here and do a full install:
https://enaon.github.io/eucWatch/p8-testing

the screen and accelerator are now auto recognized, so you will not have to choose them again, it is stable and has some nice features. Still some more testing to do, but the more that use it, the easier it is to find bugs

sherman and nibebot s2 are fully supported on testing version. 

the accelerator is way better, no need for screen allways on anymore, it will turn on the screen regardless of the way it stands on the hand (left hand only) botton,up or side of the hand will make no difference ,if the rider can see the watch, it will be on.  
 

On 8/23/2021 at 9:28 AM, Techos78 said:

It's a shame not to talk more about it, for example our machines dialogue in BLE and (almost) no one does not know the content of the frames ... it is very sad.

I am starting to agree with this statement

I am currently playing with the sherman, I found a register that looks interesting, it responds to what looks like power, but I am not sure excacltry what it is, and will have to test a lot to find out. I wish for a manual of registers for all wheels. 

his is a small video with the p22 and the sherman from a German guy that helped troubleshoot p22C touch. 

On 8/23/2021 at 3:18 AM, LGT2 said:

I just ordered a P8 for € 20 and a P22 for € 30. They both have NRF32852. The prices seem to have gone up, impossible to find less than ~ 18-20 €. Estimated time for the P22 around ten days, and around twenty for the P8. I have already downloaded the D6Flasher sources and compiled with vscode + gradle  https://github.com/atc1441/D6Flasher  it seems to be going well.   I still have to try to build the roms ... and then have fun with the javascript to customize the GUI. The exploration work of the 3 hackers mentioned in the previous posts looks very nice. Thank you.

Nice, d6flasher is an older tool, used for dsd6 band, I think is better to use daflasher, it is the successor of d6flasher, and can be found on the playstore. Also keep in mind that there is no need to build the roms, that is for installing arduino on the watch, I use espruino on the eucwatch project, and the rom images of Fanoush. 

9 hours ago, Skilr18 said:

The watch has regained touch on the screen, so I can navigate without being limited to the single button on the side.

 

Very nice, There is still an issue with long press, you have to relase you finger to register it, and it doenn't work at the bottom of the screen, but I will try to fix it too. 

Thank you for your kind words and the offer, I will soon upload some work for all to try, and help with a manual will be great.

On 7/28/2021 at 3:11 PM, Skilr18 said:

nice work, can't wait anymore my touchscreen working :):):)

Hello.

Can you please connect here, and do a full install from the installer tab, select the 816 touch option, and let me know if it works?

https://enaon.github.io/eucWatch/p8-testing

a small video of the distance logger

https://streamable.com/waaur1

On 7/20/2021 at 8:30 AM, Skilr18 said:

Yeah, it should be a nice work !
impatient to test

I am allmost there, in the meantime I just realized that you could use it anyway if you like.

You could connect using the ide
https://www.espruino.com/ide/

and on the left hand side, the black field, paste this line and press enter:

Quote

face.go("dashScan",0);setTimeout(function(){touchHandler[0](5,10,10);setTimeout(function(){touchHandler[0](5,10,40);},5000);},500);

It will scan for a kingsong wheel and select the first one, from there on you could just use the side button to enable /disable the connection.