enaon

12 hours ago, bugatti45 said:

Bonjour,
Lorsqu'on veut faire une mise à jour, faut-il refaire toute la procédure depuis le début ou bien y a t-il une autre procédure ?

like @Techos78 said, the first part is for installing espruino, the second is scripts management. 

The fists part is one time only, except on the event of a newer espruino image that adds something important, then you may do just step 4 again, but I don't think this will happen, the image is stable. 

The second part is done by the loader, it will inform you if you have any updates when you connect (in the tab "my apps") and you may  apply them by pressing the update  button. 

You do not really have to restart the watch in order to allow for incoming BT connections, if you leave it enabled it will stay enabled. But if you disable it, a restart from the watch menu is needed after selecting the >. icon from the bt menu to enable incoming BT connections for the loader.

if you enable the >. icon but do not restart the watch from the info menu to save the changes, the loader will issue a restart to upload the scripts, and since the change is not saved, the watch will disable incoming bt connections on reboot and the loader will hang the connection. 
 

So , the easiest way to not worry about all that, is to not disable the incoming bt connections, the >. button, or maybe I will make it auto save the state, so as to not be confusing. 

Another note:

the speed and the ampere values on the haptic menu serve a third purpose too, they force the screen to stay on when over the limit. 

4 minutes ago, Techos78 said:

Just a quick question: how to inhibit a haptic alarm? Should we enter a zero value or a very large, unreachable value?

I must rename this menu, it is dual purpose. 

The vibration part can be toggled by turning the corresponding switch off( gray) or on (blue) in the haptic menu.

the dash color coding and visual alerting is fixed, it can not be disabled, it changes based on the values on the haptic menu. 

On 5/21/2021 at 2:14 PM, Techos78 said:

And in the big climbs, the whole graph turns yellow, it is not very logical but it is perfect like that.

Just a note on that, to make it a bit more clear. 

when this field is in ampere mode display, it tries to serve a dual purpose:

• provide a time graph of amps, negative and positive, 
• provide visual feedback that amp usage is over the one that the user has set in the haptic amp menu, regardless if the haptic is on or not. 

So when the graph turns yellow, it means that you are "now" over the amp limit on the haptc menu. 

I will do some renaming, it is a bit confusing. 

23 minutes ago, tokumeino said:

Est-ce que ça 
https://a.aliexpress.com/_vFdNlT ça pourrait aller ? Ça a l'air pareil mais BT 4.2 (moins gourmand en énergie que le BT 4.0). Ils mettent : Chip HS6620D. Il y a l'air d'y avoir plusieurs chipstets qui marchent...

no the se is not compatible. in needs to be an nordic nrf52832, not the hs6620D. 

I think the p8 is getting out of production, prices will go up and then it will be end of line. 

On 5/22/2021 at 3:32 PM, Techos78 said:

No chance. I again lost the swipe function, before downloading the new release.

github does not detect the watch, I do not have the possibility to reset the BT ... I am stuck ...

Is there hard reset inside ?

I am sorry, I only just show this post. 

Yes, there is watchdog enabled and a failsafe mechanism, it stops srcipts loading on start and enters a special state called devmode, that resets BT setup.

• hold the side button for over 40 seconds, you will feel a buzz at about 35 secs in, release the button 5 seconds after that. (screen will remain off)
• Scan for the watch from the loader, it will be shown as "espruino-devmode"
• re install the scripts.
• tap the side button when finished uploading, it will exit devmode and run the scripts. 
   

8 minutes ago, dro77 said:

i don't have indication on my panel watch ? I just have volt, temp and speed ,

Do a swipe down, it will change to the digital dash, you can set the miles/kph there, and it will keep it for the simple dash too.

(change to simple dash by swipe down again)

45 minutes ago, dro77 said:

Hello,

 

Small question updating the watch yesterday and I have two questions :

1. The speed while driving is not good, I tried to keep pushing to see if I was not in miles with no result, it shows 19 while I am around 30.
2. I have vibrations with the KS16S continuously and with MSP every 10 seconds or so.

 

does that remind you of something?

 

 

Thank you

the miles per hour or kilometers per hour is displayed under the speed, mph or kph. Long hold on the speed field to change it. 

Vibrations may be from the haptic menu, disable everything there, or long hold on the items to set the limits, and please tell me if that solved it. 


 

thank you @Techos78

there was a mistake in the digital dash, it caused low mem and it killed the touch controll, it is now fixed. 

Also, only for degode wheels, a long touch in the amperage graph will reverce the amp bars, some wheels measure positive and some negative, so change it to yours. Settings are auto saved per wheel slot.

For inmotion, total trip, top speed  and time is not yet gathered, so I guess what you see is the info from the kingsong wheel, or  a mistake. I will fix that and let you know so you can test. For the temperature on the inmotion  I use the mos field, I think it is the most important. 

14 hours ago, dro77 said:

Yes work with my Gotway MSP when push button watch , 4 bips in speaker but sometime lights up at same time .

 

 

Are you maybe using the testing branch? If so, please reload from the normal one. 

I have pushed some changes, and some fixes, I pushed too early yestreday and there were mistakes.

@Techos78 please update too, I changed some things on the imotion too, mileage, clock. amps-bat-alarms log. 

This is what you can expect from a gotway wheel now, the graph under the speed is the buzzer history.

One can change voltage o gw wheels by long hold on the battery in the digital face(67/84/100 volts)

Testing is welcome

On 4/29/2021 at 6:43 AM, enaon said:

@spiken, or anyone that has an android phone and a z10, I would like some help.

I do not have access to a z10, and I would like to see the sequence euc world expects when connecting. 

 

 

if you have some time please do the above and send me the log, not public if you want as it will most probably have the z10 serial number included.

also a reminder about this message, I am this close to getting the bridge working.

no sniffer, just the watch

On the eucbegode.js file, I uncommented this line
//print( event.target.value.buffer);
so I could have an echo on the cli of every response I got from the wheel when connected. 

I then went to the ide,

https://www.espruino.com/ide/#
connected to the watch, uploaded the file so that I can test, connected to the wheel, and did the freerun and alarms tests while looking at the output, trying to find what changes when the buzzer is on, in hopes that something will, and it did. I don't like manuals, I like the manual way 😁

https://forum.electricunicycle.org/topic/22393-vibrator-engine/page/2/?tab=comments#comment-369013

1 hour ago, Techos78 said:

Great, @enaon , 

But :

I'm pretty sure this feature was known by few crackers who looked at the bluetooth messages for any wheels. It's terrifying: there is no collaboration between the developers ... who not edit the content of bluetooth frames for the community. That's a pity. 

It wasn't I am afraid, I informed seba first thing, he will test too and add it to eucworld.

There is no collaboration problem , both seba and the guys from wheellog are fine the way I see it. Lets hope it works and it was just an overlook, better late than never. 

If anyone is using a gotway, I think I have good news. 

A friend of mine had an accident on a gw, what else, he could not hear the buzzer. 
The wheel came to me for inspection, and I got some motivation to look if the buzzer is reported on the bt level. The wheel is a moster v3, and I found a flag that is raised when the buzzer is on. 

Anyone that want to test, do the three updates using the site:

https://enaon.github.io/eucWatch/p8#

the buzzer will cause 4 long haptic feedbacks on the watch, and light up a exclamation mark to the digital dash.

Please test if you have some time. 

58 minutes ago, dro77 said:

hi @enaon little question i have problem with my gotway msp 100 volt, when change battery % for battery volt this is not not good ! it's setting on watch ? 

Thank .

yes, voltage readings on begode are off, but % is ok I believe. Touch once on that area, and it will turn to %, and please let me know if it is ok. 

6 hours ago, dro77 said:

Hello . Petite question c'est possible d'éteindre la montre ? Pas trouvé ni sur la doc du repo ni en cherchant sur la montre , merci

Envoyé de mon MI 9 en utilisant Tapatalk
 

I  removed the shutdown menu button because it was draining the battery, I will add it again later if I fix it.
 

12 hours ago, Techos78 said:

J'ai fait un parcours de 2 heures 50 minutes avec une luminosité 3 sur 7, et l'écran allumé environ 95% du temps : la batterie restante est 47%, par conséquent l'autonomie globale est supérieure à 5 heures, c'est parfait. Avec un temps couvert ou un soleil pâle, la vitesse reste lisible. 

Thanks for testing.

Screen-on most of the time, means you have the speed haptic alert very low. 

The number you set on the speed haptic menu, is not just for the buzzer, it also changes the color of the display, and turns on the screen. It is something like an alarm, ready to see, but maybe if you want better battery life, take it a bit higher.

You can enable/disable the buzzer output, but the color change and the screen-on is not selectable yet, it will happen over the limmit. 

The watch should be able to do over 2 days of riding with sceeen off, and about 3 hours with screen on at 7, so if you set it to always-on at a higher speed, it will last all day. 

The menus will change to make this simpler, I only write all this for your tests, thanks for doing them

this is the part that takes the screen on, if either speed or amprere  is over the set values on haptic menu for inmotion, he screen is on too. 

Quote

                //screen on
                if ((1<euc.dash.spdC||1<euc.dash.ampC)&&!w.gfx.isOn ){
                    face.go(set.dash[set.def.dash],0);
                }

ps. I am following all the issues you report, I will add them and let you know if you can test. 

ps2. there is a global gesture you may find useful. A swipe up from bottom left corner, will toggle setbrightness/fullbrigtness, just a quick way to get it to full from any screen, without changing your settings. 

ps3.

On 5/4/2021 at 3:28 PM, Techos78 said:

the finger swiping does not always work very well, just have to retry.

This maybe means that you have the 716 controller, there is a version that works even if 816 is selected, but not well. 

You can update only the handler file from the loader page, and select the 716  to see if it gets any better.
https://enaon.github.io/eucWatch/p8#core

2 hours ago, Techos78 said:

 The start-up is very simple: double press button, press "run time" window ... and it works

It is even simpler. Just long hold the button, it will connect/diconnect, no matter the screen it is on etc. 

I removed the long hold on screen to connect/disconnect, because it confused some people, nice you told me about the way you connect, you would have thought it didn't work anymore :)

I could add it again if you find it more usefull than long press on the side button. 

On 5/3/2021 at 11:07 AM, Techos78 said:

Attention

I have pushed some changes, I think I took care most of the good points you  made, and made some improvements too.

https://streamable.com/yizpuy

https://enaon.github.io/eucWatch/p8

1 hour ago, Techos78 said:

It works   

NIce.

What do you think are the most importand settings that you may want to use on the V11, so that I will put them on the watch?

I pushed some changes:

Inmotion V11 should now connect and display basic dash info, no settings yet, please confirm as  we do not have a wheel to check. The work on the imotion client was done by @freestyl3r, he now sold his wheel to get a monster sport.

Kingsong 18A should display battery correctly. 

On the simple dash, touching the top right corner will toggle between battery percentage - voltage

On the simple dash, long holding on speed will toggle between Kh/h -  ml/h

On the clock face, long hold on hours will toggle 24 - 12 hour mode. 

https://enaon.github.io/eucWatch/p8

8 minutes ago, kikarom said:

Sorry I don't understand. 

The touch is working, I can move into the menu, but the clock is not at the good timing.

I am sorry, my mistake, I thought you could not move inside the menus. 

Ok, so, the time gets lost after power loss, the watch does not have an rtc chip inside. 

two options:

1.Go to the loader web page, and press the "set time" button, and then the "restart" button, it will set the time.

2.set the watch to work with gadgetbridge , it will auto get the time from the phone. 

https://github.com/enaon/eucWatch/issues/6

also, do not use the "shutdown" button on the info page on the watch yet, it drains the battery, it needs some work. Just let it be if you don't use it, it will last over a month when doing nothing. 

4 hours ago, kikarom said:

la navigation est ..particulière lol

elle etait a l'heure, je l'ai éteinte, enfin je pensais...en voulait la rallumer , impossible sauf avec le chargeur, donc batterie a 0%.

et depuis impossible de la remettre a l'heure !! quelqu'un connait la manipulation ?

Are you sure the touch is working? Select another controller if not, the menu is a bit strange, but what you describe looks like you do not have touch enabled. 

@Techos78 A little bit more time

3 minutes ago, Techos78 said:

I have successfully connected my KS18A. There is probably a problem with its 60 Volts voltage. 

my bad, I thought all KS18 were 84V, I will update and let you know for tomorrow, goodnight

1 hour ago, Techos78 said:

Oui, c'est formidable, j'attends ça depuis des années. Mais je suis vraiment gêné vis à vis de @enaon , il a fait un travail formidable, il serait normal qu'il soit récompensé...

I have been waiting for a watch like that for years myself too.

When it comes to the watch, I feel like the wheel is our King, we all are D'Artagnan, and @fanoush, @atc1441 and @gordon are the three Musketeers. If it wasn't for them, especially ATC1441 and fanoush that formed an team that was a joy to follow on their hacking voyages, I would not have gone far by myself. I was just lucky to be on the right place at the right time with the right mentality, so they helped me a lot with everything.

I didn't even know any javascript when I started, i tried it because I wanted one and could see it is possible, but I was a newbie.
 
So I got my reward, knowledge and results, no need for anything else. But, if one wants to offer a coffee, do consider one of the three in my credits page, fanoush is Athos