19 hours ago, sojin said:

Par contre lorsque j'éteins la roue, la montre indique 'LOST' et se met a vibrer par intermittence à jamais (il me semble). Je n'arrive à stopper ça qu'en supprimant la roue dans 'garage' ou en désactivant le Bluetooth.

Pour connecter/déconnecter il suffit d'appuyer longuement sur le bouton latéral, la dernière roue sélectionnée dans le garage sera utilisée.

Les messages "far" / "lost" fonctionnent ainsi :

Si l'on ne termine pas la séance à la roue, mais s'en éloigne, la montre ne pourra pas se connecter mais pourra tout de même scanner la roue. Ceci est indiqué comme "far" sur l'écran, et la montre essaiera de se reconnecter silencieusement toutes les secondes.

Si l'on s'éloigne encore plus ou que les roues s'éteignent, la montre ne pourra pas rechercher la roue, affichera "lost" et alertera avec un buzz toutes les cinq secondes, jusqu'à la fin de la session par un appui long sur le bouton latéral.

Bonjour, 

Merci pour vos précisions. 

Bonne journée 👍

Citation

Set again the limits of 40/45 to more appropriate numbers using the watch, and please tell me if the buzzing stopped.

Hi @enaon I set appropriate numbers on my watch and the buzzing doesnt stopped, but ....
when I riding, background of the mark (!) is RED

Modifié le 23 juin 20214 a par bugatti45

Ne pas confondre : ci-dessous je ne parle pas de enaon qui a écrit l'application EUC Watch + plateforme de transfert, mais de celui qui a rendu cela possible en prenant le contrôle des montres P8, d'abord par fils puis par bluetooth.

exemple de flashage par liaison filaire :

https://www.youtube.com/watch?v=gUVEz-pxhgg&t=27s
https://www.youtube.com/watch?v=PGko5StwzW4
https://www.youtube.com/watch?v=csi-ZN0RhSw
etc.....

Aaron Christophel -- atc1441 (auteur de DaFlasher...etc) dit :
" Hack the planet! my biggest passion is to open the possibility to run Custom Firmware on as many devices as possible. "

C'est étonnant, regardez ce qu'il faisait il y a 10 ans
https://www.youtube.com/watch?v=CO5tZOO_ZAw
Il a publié environ 160 vidéos Youtube, il est infatigable...

Anecdote : voilà une vidéo dans sa langue d'origine (allemand), et qui a été vue 140 fois en 4 ans...  
https://www.youtube.com/watch?v=ZpLGIgst7zM

Modifié le 24 juin 20214 a par Techos78

On 6/23/2021 at 4:11 PM, bugatti45 said:

Hi @enaonI set appropriate numbers on my watch and the buzzing doesnt stopped, but ....
when I riding, background of the mark (!) Is RED

Hello, this dash looks like a mistake, the "B 'symbol is not displayed in kingsong wheels, a number with the real variable speed limit is shown instead, like so:

 

 

Please try the following:  

1.Go to the garage page, long hold on the wheel, and then long hold on delete, to delete the entry. 

2. Do an up-gesture to go to settings, then info icon, then press on the restart button to restart the watch.

3. Add the wheel again. (by long hold the side button, or long hold on an empty garage slot)

 

If this does not help (the 'B "symbol still shows up), then please do a install again from the loader.

 

Modifié le 26 juin 20214 a par enaon

Hi @enaon, the "B symbol" is now replaced by a number (speed limit) 😀 but I have always an exclamation mark above "TRIP" and my watch buzz all the time 😢

Enaon : What a colossal and useful work !!!

How to contribute and encourage this excellent work?

My question : If I understood correctly, as long as the watch is equipped with a Nordic nRF 5283 chip, it can be flashed without worry, I spotted this model, do you think that is ok :

https://www.amazon.fr/gp/product/B08J43NZ9T/ref=ox_sc_act_image_1?smid=AVHW8RYVVLJMF&psc=1

 

6 hours ago, Skilr18 said:

Enaon : What a colossal and useful work !!!

How to contribute and encourage this excellent work?

My question : If I understood correctly, as long as the watch is equipped with a Nordic nRF 5283 chip, it can be flashed without worry, I spotted this model, do you think that is ok :

https://www.amazon.fr/gp/product/B08J43NZ9T/ref=ox_sc_act_image_1?smid=AVHW8RYVVLJMF&psc=1

 

Not all nrf52832 is easy, a way to hack it is importand, but the one you posted is the p22, it is supported since yesterday. 😁 https://github.com/enaon/eucWatch/issues/9


So yes, an espruino image for p22 is ready and support is ok for one variant, I think there are more, but that will be solved with time. Just use the p8 guide. 

Also, a new espruino image for the p8 is up, I think battery got even better, and uploads are now twice as fast, I suggest to all to upgrade only step4 using daflasher. 

@bugatti45 I will look closer what may cause this and will report back. 

ps. the bridge is ready, I am now testng it and will upload, maybe tommorow. 

Modifié le 8 juillet 20214 a par enaon

Il y a 7 heures, enaon a dit :

Not all nrf52832 is easy, a way to hack it is importand, but the one you posted is the p22, it is supported since yesterday. 😁 https://github.com/enaon/eucWatch/issues/9


So yes, an espruino image for p22 is ready and support is ok for one variant, I think there are more, but that will be solved with time. Just use the p8 guide. 

Also, a new espruino image for the p8 is up, I think battery got even better, and uploads are now twice as fast, I suggest to all to upgrade only step4 using daflasher. 

@bugatti45 I will look closer what may cause this and will report back. 

ps. the bridge is ready, I am now testng it and will upload, maybe tommorow. 

Thanks for your quick and detailed answer, i just ordered the watch

I may go back to this page if I encounter problems during the installation.

Thanks for all @enaon

Hi, I did the 1 to 4 steps correcty with daflasher,

ok on EUCWATCH website (https://enaon.github.io/eucWatch/p8) but after transfer The watch screen show up (time and date) but the touch screen don't work, (the right button work to switch the euc infos and garage on the long push on the button) 

No choice is possible without touchsceen

Modifié le 11 juillet 20214 a par Skilr18

10 hours ago, Skilr18 said:

Hi, I did the 1 to 4 steps correcty with daflasher,

ok on EUCWATCH website (https://enaon.github.io/eucWatch/p8) but after transfer The watch screen show up (time and date) but the touch screen don't work, (the right button work to switch the euc infos and garage on the long push on the button) 

No choice is possible without touchsceen

thank you for testing, so it seems yours is the variant that uses a different touch. I will prepere a debug version so that we can figure it out. 

Ok, don't hesitate to tell me if you need anything to make your job easier

Le 11/07/2021 à 23:34, enaon a dit :

thank you for testing, so it seems yours is the variant that uses a different touch. I will prepere a debug version so that we can figure it out. 

hi did you have the time to work on a debug version ?

Thanks for your answer

19 hours ago, Skilr18 said:

hi did you have the time to work on a debug version ?

Thanks for your answer

It is taking more time that I exprected to move to version 0.5, I started cleaning up the code and I had to change a lot

The result is nice I think, bridge mode, cleaner look, more settings, even more stable, cleaner connections, support for dsd6 in-helmet visual/sound feedback,  I will upload soon and it will have a mode that auto scans the i2c bus for you to test. 

Modifié le 20 juillet 20214 a par enaon

il y a 26 minutes, enaon a dit :

It is taking more time that I exprected to move to version 0.5, I started cleaning up the code and I had to change a lot

The result is nice I think, bridge mode, cleaner look, more settings, even more stable, cleaner connections, support for dsd6 in-helmet visual/sound feedback,  I will upload soon and it will have a mode that auto scans the i2c bus for you to test. 

Yeah, it should be a nice work !
impatient to test

On 7/20/2021 at 8:30 AM, Skilr18 said:

Yeah, it should be a nice work !
impatient to test

I am allmost there, in the meantime I just realized that you could use it anyway if you like.

You could connect using the ide
https://www.espruino.com/ide/

and on the left hand side, the black field, paste this line and press enter:

Quote

face.go("dashScan",0);setTimeout(function(){touchHandler[0](5,10,10);setTimeout(function(){touchHandler[0](5,10,40);},5000);},500);

It will scan for a kingsong wheel and select the first one, from there on you could just use the side button to enable /disable the connection. 

 

Il y a 7 heures, enaon a dit :

I am allmost there, in the meantime I just realized that you could use it anyway if you like.

You could connect using the ide
https://www.espruino.com/ide/

and on the left hand side, the black field, paste this line and press enter:

It will scan for a kingsong wheel and select the first one, from there on you could just use the side button to enable /disable the connection. 

 

Indeed it works perfectly, thank you for this "decisive" (for me) step

Hi!

Flashed new P8 with a previous (tested in the past) bootloader and espruino runtime (v8_200). Now can't install apps using web loader. P8 core installs ok (1/28), and handler app (2/28) install fails every time:

Install failed, undefined

Have no idea why, perhaps, it requires some new features of new espruino runtime (v9_200), but also have no idea how to update the runtime to the latest version on p8.

Can anybody help?

a small video of the distance logger

https://streamable.com/waaur1